- sales@mariapipes.com
- Kuala lumpur, Malaysia
Home > Nickel Alloy > Nickel Alloy ERW Pipes
Maria Pipes and Tubes is a renowned producer and supplier of premium Nickel Alloy EFW Pipes, headquartered in Kuala Lumpur, Malaysia. With an emphasis on accuracy in engineering and product quality, the company provides Electric Fusion Welded (EFW) pipes using nickel-based alloys suitable for high-temperature and highly corrosive conditions. The pipes are manufactured with the help of advanced welding processes to provide robust weld strength and even structure. Maria Pipes and Tubes addresses key industries like power generation, chemical processing, oil & gas, and marine and provides dependable and long-lasting piping solutions for domestic and international markets.
Nickel Alloy EFW Pipes are made of high nickel content and alloying elements like chromium, molybdenum, and iron based on the grade. All these elements provide corrosion resistance, oxidation resistance, and high-temperature strength. Mechanically, EFW pipes have superior tensile strength, fatigue life, and toughness even in severe service conditions. They are produced by electric fusion welding, which guarantees uniform wall thickness and maximum structural reliability. Some of the common grades used are Inconel 600, Incoloy 800H, and Hastelloy C276, each used to operate in conditions where resistance to acids, alkalis, and thermal stress is needed.
| ASTM Specification | Astm B829 ASME SB829 |
|---|---|
| Standard | ASTM, ASME, JIS, AISI, AMS, EN, SAE, DIN, NF, TOCT, DS, DTD, GB |
| ASTM B829 Nickel Alloy Seamless Pipe Size | 4 to 219mm W. T.: 0.5 to 20mm |
| ASTM B725 Nickel Alloy Welded Pipe Size | 5.0 – 1219.2 mm |
| Nickel-Cobalt Alloys EFW Pipe size | 5.0 – 1219.2 mm |
| Swg & Bwg | 12 Swg., 10 Swg., 16 Swg., 14 Swg., 20 Swg., 18 Swg., |
| Nickel Pipe Schedule | XS, SCH30, SCH40, XXS, SCH80, SCH120, SCH60, SCH140, STD, SCH10, SCH10S, SCH40S, SCH80, SCH20, SCH5, SCH160 |
| Nickel pipe Length | Double Random, Single Random, Standard & Cut length Pipe |
| Finish | Polished, AP (Annealed & Pickled), BA (Bright & Annealed), MF, NO.1, NO.4, 2B, BA, HL, 8K, Mirror finish, etc |
| Form | Nickel are available in form of Round, Square, Hollow, Rectangular, Hydraulic, Coiled, Straight Pipes, “U” Shape, Pan Cake Coils etc. |
| Type of Nickel Alloy Pipe | Seamless / ERW/ EFW / Welded / Fabricated / CDW / DOM / CEW Nickel |
| Nickel pipe End | Plain End, Beveled End, Treaded Pipe, Screwed ends |
| Marking on Nickel Steel Pipe | All Astm B725 Nickel Alloy Pipes are marked as follows: Standard, Grade, OD, Thickness, Length, Heat No. (Or according to the customer’s request.) |
| Application of Nickel pipe | Dairy Pipe, Oil Pipe, Gas Pipe, Fluid Pipe, Boiler Pipe for Chemical Industry |
| Value Added Service | Draw & Expansion as per required Size & Length, Polish (Electro & Commercial) Annealed & Pickled Bending, Machining Etc. |
| Specialize in | Large Diameter NickelPipe |
| Nickel pipe manufacturing Technique | Cold drawn, hot drawn, bright annealed, solid solution, hot extruding |
| Nickel pipe Test Certificate | Manufacturer Test Certificate Laboratory Test Certificate from Govt. Approved Lab. Under Third Party Inspection |
| Material Test Certificates (MTC) | Material Test Certificates (MTC) as per EN 10204/3.1B, EN 10204 3.1 and EN 10204 3.2, 100% Radiography Test Report, Heat Treatment Charts, Raw Materials Certificate, Third Party Inspection Report, Fumigation Certificates, Nickel HS Code Commercial Invoice, Form A for Generalized System of Preferences (GSP) |
| Nickel 200 | Ni | C | Mo | Mn | Si | Fe | P | S | Cu | Cr |
| 99.0 Min | 0.15 Max | – | 0.35 Max | 0.1 Max | 0.4 Max | – | 0.01 Max | 0.25 Max | – | |
| Nickel 201 | Ni | C | Mo | Mn | Si | Fe | P | S | Cu | Cr |
| Balance | 0.15 Max | – | 0.35 Max | 0.35 Max | 0.40 Max | – | 0.01 Max | 0.25 Max | – |
| Density | Melting Point | Yield Strength (0.2%Offset) | Tensile Strength | Elongation |
| 8.9 G/Cm3 | 1446 °C (2635 °F) | Psi – 21500 , MPa – 148 | Psi – 67000 , MPa – 462 | 45 % |
We provide products that come with both mill test certificates and third-party test certificates, ensuring the highest standards of quality and compliance.
Choosing Nickel Alloy ERW Pipes from Maria Pipes and Tubes ensures high quality and durability, as these pipes offer excellent corrosion resistance and strength. Our commitment to exceptional service and reliable delivery guarantees customer satisfaction across various industrial applications. Our expertise in nickel alloy products ensures you receive a top-tier solution tailored to your needs.
Maria Pipes and Tubes, one of the largest suppliers of Nickel Alloy ERW Pipes in Kuala lumpur, Malaysia, offers a comprehensive range of high-quality pipes and tubes suitable for various industrial applications. Their extensive inventory and commitment to exceptional service make them a go-to choice for nickel alloy products in the region.
Yes, we offer custom sizes for Nickel Alloy ERW Pipes to meet your specific requirements. Our team at Maria Pipes and Tubes is committed to providing tailored solutions for all your Piping & tubing needs. For more details, contact us at sales@mariapipes.com.
Nickel Alloy EFW Pipes are utilized in applications where resistance against aggressive chemicals and high temperatures is paramount. In the petrochemical and chemical industry, they find frequent applications in heat exchangers, reactors, and pressure vessels. In power plants, particularly nuclear and thermal, they deal with superheated steam and high-pressure fluid. Marine and offshore sectors utilize the pipes in systems that are exposed to seawater and corrosive media. They are also used in oil refining, aerospace, and pharmaceutical processing, where strength, cleanliness, and long-term reliability are required to ensure safe and efficient operation.
©2024 Maria Pipes and Tubes . All Rights Reserved.
